Ins Assign (Insertion Assign) - Yamaha MODX7 Reference Manual

Reference
Performance
EQ 1 Q (2-band EQ1 Q)/EQ 2 Q (2-band EQ2 Q)
Determines the EQ bandwidth for the frequency which is set in "EQ 1 Freq/EQ2 Freq." This is available
only when "EQ Type" is set to "Peak/Dip."
Settings: 0.1–12.0
NOTE For details on EQ structure, see the Synthesizer Parameter Manual PDF document.
Output Level (2-band Output Level)
Determines the Output level of the 2-band EQ.
Settings:
-12dB – +12dB

Ins Assign (Insertion Assign)

In the Insertion Assign display, you can set the Insertion Effect for Parts 9–16.
[PERFORMANCE (HOME)]  [EDIT]  Part selection  Element [Common]  [Effect] 
Operation
[Ins Assign]
Active (Active Part)
Shows the number of Parts with the Ins FX SW set to ON. The number that follows the slash (/) sign is the
maximum number of Insertion Effects that can be simultaneously set to ON.
Part9–Part16
Sets the Insertion Effect for Parts 9-16 ON or OFF.
Settings:
Off, On
NOTE The Insertion Effect for Parts 1–8 is always ON.
MODX Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
81