In Case Of Part Category Search - Yamaha MODX7 Reference Manual

Reference
Performance
 In case of Part Category Search
You can select any Part in a Performance and assign the sound of the Part to another.
When "Mixing" of the "Parameter with Part" (Param. with Part) setting is set to off, you can change sounds
continuously, using the current setting values for the Part such as Volume, Pan and Note shift.
[PERFORMANCE (HOME)]  (When the Part to which any sounds are assigned is selected) Select
the Part Name  [SHIFT]+[CATEGORY] (Part Category Search)
Operation
or
(When the Part to which any sounds are assigned is selected) Touch the Part Name  Select
[Category Search] from the displayed menu
When the selected Part and all succeeding Parts have no sound assigned (or are empty), executing the
operation above opens the Performance Merge display.
Source
Determines which Part of the selected Performance will be assigned to the Performance being edited.
Settings: Part 1–16
Solo (Solo Switch)
Determines the Solo function is active (On) or not (Off.) When this is set to on and any sound is assigned to
the Part, only the Part will be sounded.
Settings:
Off, On
Param. with part (Parameter with Part)
Determines whether or not to read and use the parameter values for the next Performance. When the set of
parameters is set to off, the current setting values are continuously used even when the next Performance
is selected.
The "Zone" parameter is available only when "Zone Master"
Settings:
Off, On
MODX Reference Manual
Edit Search
(page 193) is set to on in the Utility display.
Utility Live Set
Search
Performance Category
Arp Category
Waveform
Rhythm Pattern
178