Control Number - Yamaha MODX7 Reference Manual

Reference
Performance
Edit Part Control Settings
Calls up the Control Assign display for the currently selected Part.
Curve Type
Determines the specific curve for changing the parameter which is set in "Destination." The horizontal axis
indicates the value of the controller set in "Source" and the vertical axis indicates the parameter values.
Settings: Standard, Sigmoid, Threshold, Bell, Dogleg, FM, AM, M, Discrete Saw, Smooth Saw, Triangle, Square, Trapezoid, Tilt
Sine, Bounce, Resonance, Sequence, Hold
For User Bank:
User 1–32
When a Library file is read:
Polarity (Curve Polarity)
Determines the Curve Polarity of the Curve type set in "Curve Type."
Settings:
Uni, Bi
Uni: Unipolar changes only in a positive direction or in a negative direction from a base parameter value according
to the Curve shape.
Bi:
Bipolar changes in both of positive and negative directions from a base parameter value.
Ratio (Curve Ratio)
Determines the Curve Ratio.
Settings: -64 – +63

Control Number

Determines the MIDI Control Change numbers common for the entire system. You can use the Knobs on
the front panel and external controllers by assigning appropriate MIDI Control Change numbers. When the
same control number is assigned to the Super Knob and any Assignable Knob, the Super Knob takes
priority and operation of the Assignable Knob may be ignored. A warning message appears in that case.
NOTE External controllers include external sequencers and external MIDI controllers.
NOTE The Control Number set in this display is stored as Performance data. However, "FS Assign," "Super Knob CC"
and "Scene CC" are stored as general system settings, and not as Performance data.
[PERFORMANCE (HOME)]  [EDIT]  [Control]  [Control Number]
Operation
Ribbon Ctrl (Ribbon Controller Control Number)
Determines the Control Change Number received from an external device with a Ribbon Controller.
Even when the instrument receives MIDI messages with the same Control Change Number specified here
from an external device, the instrument assumes that the message is generated by operating the Ribbon
Controller.
Settings: Off, 1–95
MODX Reference Manual
Edit
Normal Part (AWM2)
Curves in Library 1–8
Search
Drum Part Normal Part (FM-X)
Utility Live Set
Common/Audio
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
USB Monitor
167