Side Chain/Modulator (Side Chain/Modulator Part); Ins Connect (Insertion Connection Type); Part Output (Part Output Select); Envelope Follower - Yamaha MODX7 Reference Manual

Reference
Performance

Side Chain/Modulator (Side Chain/Modulator Part)

The Side Chain/Modulator uses the output from one track to control an effect in a different track. You can
specify the Effect type for activating the feature so that input signals for Parts other than the selected Part
or the audio input signal can control the specified Effect. This may not be active depending on the
particular Effect Type.
Here you can determine the Part used for the Side Chain/Modulator.
This is not available when you select the same Part or "Master" as the Modulator Part.
Settings: Part 1–16, A/D, Master, Off

Ins Connect (Insertion Connection Type)

Determines the effect routing for Insertion Effects A and B. The setting changes are shown on the diagram
in the display, giving you a clear picture of how the signal is routed. For details, see the section "Effect
connection" (page 20) of the "Basic Structure."
Settings: Parallel, Ins AB, Ins BA
Rev Send (Reverb Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the
Reverb effect. This is available only when "Part Output" is set to "MainL&R."
Settings: 0–127
Var Send (Variation Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the
Variation effect. This is available only when "Part Output" is set to "MainL&R."
Settings: 0–127

Part Output (Part Output Select)

Determines the specific audio output.
Settings: MainL&R, USB1&2...USB7&8, USB1...USB8, Off
MainL&R:
Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
USB1&2 USB7&8:
...
USB1 ... USB8: Outputs in mono (Channels 1...8) to the [USB TO HOST] terminal.
Off:
No audio signal for the Part is output.

Envelope Follower

Calls up the Envelope Follower setting display. For details on the Envelope Follower, see the "Envelope
Follower Block" (page 21) in the "Basic Structure."
Part (Input Source)
Displays the Part as "Input Source" for the selected Envelope Follower.
Settings: Master, AD, Part 1–Part 16
MODX Reference Manual
Edit
Normal Part (AWM2)
Outputs in stereo (Channels 1&2...7&8) to the [USB TO HOST] terminal.
Search
Drum Part Normal Part (FM-X)
Utility Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
76