Table Of Contents; Symbols - Makita EA3600F Owner's Manual

English

SYMBOLS

You will notice the following symbols on the saw and in the Owner's and Safety Manual:
Read Owner's and Safety Manual and
follow the warning and safety precautions!
Particular care and caution!
Forbidden!
Wear eye protection.
Wear ear protection.
Wear protective helmet, eye and ear
protection!
Wear protective gloves!
No smoking!
No open fire!
Stop engine!
Start engine
Combination switch, Choke ON/STOP
Caution, kickback!
* The Computed Kickback Angle is a calculated value from energies measured on a test bench. It is not the angle of the guide bar moved
upward in case of a KICKBACK.
(Original instructions)

Table of Contents

Symbols ............................................................................................2
Safety precautions ............................................................................3
Technical data.................................................................................12
Designation of parts........................................................................13
Chain saw's safety function ............................................................ 14
Assembly ........................................................................................16
Before use ......................................................................................19
Starting and stopping engine .......................................................... 21
Maintenance ...................................................................................23
Maintenance interval ......................................................................28
Trouble shooting .............................................................................29
2
Chain brake
Fuel and oil mixture
Chain oil fill/oil pump
Saw chain oil adjustment screw
Primer pump
Chain direction
First aid
Do not touch hot surfaces!
Maximum Computed Kickback Angle
(CKA)* without using the chain brake
when using the recommended bar and
chain combinations (In this example the
CKA is 45°).
Maximum Computed Kickback Angle
(CKA)* with using the chain brake when
using the recommended bar and chain
combinations (In this example the CKA
is 40°).
Contact of the guide bar tip with any
object should be avoided!
Tip contact may cause the guide bar to
move suddenly upward and backward,
which may cause serious injury!
Always use two hands when operating
the chain saw!
Reduced Kickback Bar and Chain
combination that has been evaluated
with the power head to achieve kickback
protection (according to ANSI and CSA
standards).
Page