Functional Description; Adjusting Depth Of Nailing - Makita AN923 Instruction Manual

007005

FUNCTIONAL DESCRIPTION

CAUTION:
Always lock the trigger and disconnect the hose
•
before adjusting or checking function on the tool.
Nose adapter (Accessory)
CAUTION:
Always lock the trigger and disconnect the hose
•
before installing or removing the nose adapter.
When nailing workpieces with easily-marred surfaces,
use the nose adapter.
Attach the nose adapter to the contact arm.
1
2
007803

Adjusting depth of nailing

A
B
1
007006
To adjust the depth of nailing, turn the adjuster. The
depth of nailing is the deepest when the adjuster is
turned fully in the A direction shown in the figure. It will
become shallower as the adjuster is turned in the B
direction. If nails cannot be driven deep enough even
when the adjuster is turned fully in the A direction,
increase the air pressure. If nails are driven too deep
even when the adjuster is turned fully in the B direction,
decrease the air pressure. Generally speaking, the tool
service life will be longer when the tool is used with a
1. Pneumatic tool
1
oil
1. Contact arm
2. Nose adapter
1. Adjuster
lower air pressure and the adjuster set to a lower depth of
nail driving.
CAUTION:
Always lock the trigger and disconnect the hose
•
before adjusting the depth of nailing.
Installing the hook
1
007062
CAUTION:
Always lock the trigger and disconnect the hose
•
from the tool.
Never hook the tool at high location or on
•
potentially unstable surface.
The hook is convenient for hanging the tool temporarily.
To use the hook, simply lift up hook until it snaps into the
open position.
When not in use, always lower hook until it snaps into the
closed position.
ASSEMBLY
CAUTION:
Always lock the trigger and disconnect the hose
•
before carrying out any work on the tool.
Loading the nailer
007007
Select nails suitable for your work. Insert strip of nails into
the magazine.
5
1. Hook