Installing A Din Rail; Mounting The Din Rail Bracket On The Router; Wall/Floor Mounting Clearance And Overall Dimensions - Cisco IR1101 Hardware Installation Manual

Figure 3 Wall/Floor mounting clearance and overall dimensions with mounting brackets attached
5. Route the cables so that they do not put a strain on the connectors or mounting hardware.

Installing a DIN Rail

The DIN Rail kit is ordered separately.
The DIN Rail can be installed in two different orientations, horizontally and vertically.
To attach the DIN rail bracket to the Cisco IR1101, follow these steps.

Mounting the DIN Rail Bracket on the Router

1. First, attach the DIN rail bracket to the back of the router. The DIN rail bracket mounts in two different ways,
depending on the orientation you wish to use. See
orientation.
Figure 4 for vertical orientation, and
30
Figure 5 for horizontal