Specifications And Panel Wiring; Specifications - Honeywell IP-AK2 Installation And Configuration Manual

Specifications and Panel Wiring

6 Specifications and Panel Wiring

Specifications

Specification
Relay Contacts
Reader Interface
Maximum Output Loading
Common Connections
Mechanical
Environment
Cable
48
Parameters
Four Form-C SPDT relays, 3A @ 28VDC (external PTC preferred)
Voltage: 12VDC nominal
Power
Current: 300mA combined with two readers
LED Output Open collector driver capable of sinking up to 8mA
Tamper Supervised or non-supervised input
Data Input TTL compatible inputs
Buzzer Output Open collector driver capable of sinking 8mA at 12VDC
Honeywell JT-MCR MIFARE Smart READERS
Honeywell HON-MSR MIFARE SECTOR READERS
Reader Type HONEYWELL OmniProx PROXIMITY READERS
Honeywell OmniClass SMART READERS
Honeywell HON-FIN3000 Fingerprint
Reader 150mA (any of the two reader outputs)
150mA (battery charge current for the battery wired in
Battery
series)
Total 300mA (combined current of the two reader outputs)
The common connections of supervised input are all connected internally. They are
not connected to the panel chassis.
The common connections of relay output are NOT all connected internally, which are
NOT connected to the panel chassis.
Height: 340mm (13.4inches)
Enclosure Dimension
Width: 290mm (11.4inches)
Depth: 78mm (3.1inches)
Enclosure Weight 5Kg (11lbs), with one battery
Operating: 0˚C ~ 50˚C
Temperature
Storage: -55˚C ~ +85˚C
Humidity 5% ~ 85% RHNC
Shield, cat5 to RJ-45
Ethernet
(Maximum 10 panels)
Readers 7-Conductor, Shielded
Supervisor Input Twisted Pair, Shielded
Relay Outputs Twisted Pair, Shielded
330inches (100m)
(Maximum Distance)
500 inches (153 m)
(Maximum Distance)
2,000 inches (610 m)
(Maximum Distance)
2,000 inches (610 m)
(Maximum Distance)