When 12V of electric current is supplied (see Figure 8), the terminal
commences operation and the green "RUN" LED lights up (see Figure 7)
Battery
P10 wall-tamper
(jumper)
P12 connector
for production
jumper -
LEAVE OPEN!
I/O terminal box
Figure 8: Close-up view of the 12V supply
Connecting the Cables
JTAG
Battery fuse (F1)
Ethernet 10BaseT
Figure 7: Main circuit components
orange
green-yellow
Battery cable
Status LED
RESET button
JP4,JP3 jumpers
Ethernet (test)
Power supply
fuses
Plug-in Ethernet
power supply (12V)
grey
tamper
TX (red)
RX (green)
Collision (red)
RUN (green)
Page 11