Downloading The Contents Of The Programming To Satellites - Master; Initial Downloading - Sharp UP-820F Instruction Manual

8. Downloading the contents of the programming to satellites – master
When you have completed the programming at the master, you can distribute the preset data from the
master to all or desired satellites in the IRC system.

(1) Initial downloading

For initial setup of the IRC system, follow the downloading procedure below. When the preset data in
the master is downloaded to each satellite, existing preset data in the satellite, if any, is cleared.
Check the contents of the programming of all the satellites in the IRC system that have received
NOTE
the preset data.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select "INITIAL D/L" and press the
The INITIAL D/L window will appear.
3.
If you wish to distribute all preset data files in the master to
satellites, select "ALL PGM" and press the
wish to distribute an individual preset data file, select the
corresponding data item and press the
Enter an appropriate code range if needed.
The MACHINE No. window will appear.
4.
If you wish to download the preset data to all satellites, select
"ALL" and press the
to certain satellite(s), select "MACHINE SELECT" and press
e
the key. In this case, the MACHINE SELECT window will
open.
Move the cursor to the corresponding machine numbers,
select "YES," and press the
e
key.
e
e
key.
e
key. If you wish to download the data
c
key.
key. If you
13