1
1. High-Low speed setting button
ASSEMBLY
1
2
1. Cover
2. Side grip
1
2
1. Cover
2. Side grip
6
High-Low speed setting button
For PV7001C only
003444
The tool speed can be changed instantly while the tool is running. Depress the
"I" position for lowest speed and depress "II" position for a given number set-
ting.
The tool speed cannot be changed when the button is in "I" position, even if
you turn the speed adjusting dial. When you turn the speed adjusting dial,
always be sure that the button is depressed in "II" position.
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing side grip (auxiliary handle) & cover
004419
CAUTION:
•
Always be sure that the side grip is installed securely before operation.
Install the cover, then screw the side grip on the tool securely. The side grip
and the cover can be installed on either side of the tool.
004420