Table of Contents
Advertisement
FUNCTIONAL
DESCRIPTION
1
2
1. Switch trigger
2. Lock button
2
1. Speed adjusting dial
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
003407
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
Speed adjusting dial
For PV7001C only
The tool speed can be changed by turning the speed adjusting dial to a given
003408
number setting from 1 to 5.
Higher speed is obtained when the dial is turned in the direction of number 5.
And lower speed is obtained when it is turned in the direction of number 1.
Refer to the table for the relationship between the number settings on the dial
and the approximate tool speed.
1
CAUTION:
•
If the tool is operated continuously at low speeds for a long time, the
motor will get overloaded, resulting in tool malfunction.
•
The speed adjusting dial can be turned only as far as 5 and back to 1. Do
not force it past 5 or 1, or the speed adjusting function may no longer
work.
The tools equipped with electronic function are easy to operate because of the
following features.
•
Electronic constant speed control
Possible to get fine finish, because the rotating speed is kept constant
even under the loaded condition.
•
Soft start feature
Soft start because of suppressed starting shock.
Number
1 - 2
2 - 3
3 - 4
4 - 5
C00040
-1
min
(RPM)
600 - 800
800 - 1,300
1,300 - 1,800
1,800 - 2,000
5
Advertisement
Table of Contents
