Set Time; Set Date - Honeywell T775A/B/M 2000 Series Installation Instructions Manual

MENU
SCHEDULE
OPTIONS
Fig. 74. Schedule - Options Menu.
MAIN
SCHEDULE
OPTIONS

SET TIME

Fig. 75. Schedule - Options - System Time.
MAIN
SCHEDULE
OPTIONS

SET DATE

Fig. 76. Schedule - Options - System Date.
T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
MENU
SCHEDULE
OPTIONS
SET TIME
SET DATE
DAYLIGHT
EXIT
M24537
MAIN
SCHEDULE
OPTIONS
SET TIME
08:12 AM
SET
SYSTEM
TIME
M24538
MAIN
SCHEDULE
OPTIONS
SET DATE
01/01/2007
SET
SYSTEM
DATE
M24539
31
3.2. OPTIONS
1. From the Schedule menu, use the
tons to highlight OPTIONS.
2. Press the button to display the Options menu.
3.2.1. SET TIME
Setting the system time is required to enable the
controller to follow daylight saving time.
IMPORTANT
Set the Date before setting the Time. See "3.2.2.
SET DATE".
1. From the Options menu, use the
tons to highlight SET TIME.
2. Press the button to display the current system
time setting.
3. Use the button to cycle between the hour, min-
ute, and AM/PM values.
4. Use the and
the desired value for the hour, minute, and AM/PM.
5. Press the button to accept the Time and return
to the Options menu.
3.2.2. SET DATE
Setting the system date is required to enable the
controller to follow daylight saving time.
IMPORTANT
To properly account for Daylight Saving time, be
sure to set the Date before setting the Time.
1. From the Options menu, use the
tons to highlight SET DATE.
2. Press the button to display the current system
date setting.
3. Use the
button to cycle between the month, day,
and year values.
4. Use the
and
the desired value for the month, day, and year.
5. Press the
button to accept the Date and return to
the Options menu.
and
and
buttons to increase/decrease
and
buttons to increase/decrease
62-0254—13
but-
but-
but-