Scheduling; Exit Setup Mode; Creating A Schedule; Entering Schedule Mode - Honeywell T775A/B/M 2000 Series Installation Instructions Manual

T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
Fig. 72. Setup - Outputs - Relay - Exit.

3. SCHEDULING

Scheduling provides the ability to set daily temperature
settings for up to two events per day. Typically, these are
the daytime (setpoint) and the nighttime (setback)
settings.
IMPORTANT
To enable Scheduling, you must first enter Setup
mode (press and hold the MENU button for 5
seconds), select OUTPUTS, select OPTIONS,
select USE SCHED, and then select YES. (See
"2.3.3.1. USE SCHED" on page 25).
IMPORTANT
To properly account for Daylight Saving time, be
sure to set the Date before setting the Time.
See "3.2.2. SET DATE" on page 31.
NOTE: Each output is independently configurable to
follow the schedule or not. For modulating
outputs, See "2.3.1.5. SCHEDULE" on
page 23. For relay outputs, see "2.3.4.2.
SCHEDULE" on page 29.
NOTE: The controller interface is intuitive. You may
find that you do not need the following
scheduling instructions. You may want to use
this procedure simply as a reference to
locate the particular option or parameter of
interest.
MENU
SCHEDULE
Fig. 73. Schedule - Menu.
62-0254—13
SETUP
OUTPUTS
RELAY 1
RESET
SCHEDULE
RESET RT
EXIT
M24534
MENU
SCHEDULE
OPTIONS
MON-FRI
SAT-SUN
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
EXIT
M24536
30

2.4. EXIT Setup Mode

Press the button to exit the selected relay set up and
return to the Outputs menu.
To setup the next relay output go to "2.3.4. Setting up the
Relays" on page 27.
If you are finished setting up the relay outputs, press the
HOME button to exit Setup mode and return to the home
screen display.
This completes the Setup procedure.
NOTES:
1. If you press the HOME button or there is no
keypad activity for four minutes, you exit
Scheduling mode and return to the home
screen.
If you press the MENU button, you exit
2.
Scheduling mode and return to the menu.
To create or change a schedule, you use the —
• Left arrow button (
Schedule menus
• Right arrow button (
item and display its content
• Up and Down arrow buttons (
and down through a list of items or to increase or
decrease the value of a displayed schedule parameter

Creating a Schedule

To create a schedule, perform the following in the order
listed:
1. Enable Scheduling in Setup mode - See "2.3.3.1.
USE SCHED" on page 25
2. Enter Schedule mode — See "3.1. Entering
Schedule Mode"
3. Set the Schedule Options — See "3.2. OPTIONS"
4. Set Individual Schedules — begin with "3.3. Setting
Individual Schedules" on page 32
5. Exit Schedule Mode — See "3.4. Exiting Scheduling
Mode" on page 33

3.1. Entering Schedule Mode

Press the MENU button, then select SCHEDULE and
press the button to view the Schedule menu.
) to scroll backward through the
) to select the highlighted menu
and ) to scroll up