Assemble The Power Supply - Honeywell 8670 Quick Start Manual

Assemble the Power Supply

The AC power supply for the battery charger is shipped with the
battery charger. For non-US models a power cord is required.
1. Plug the A/C power cord into the power adapter.
2. Plug the power cable into the power connector on the back
of the 8670 8-Bay Battery Charger.
3. Plug the A/C power cord into a grounded power source. The
charger is now powered.
The charge pocket LEDs flash while the battery charger enters
and exits the startup check. The battery charger is ready for use
once the charge pocket LEDs are no longer illuminated.
3