Honeywell 8670 Quick Start Manual

®
8670 Bluetooth Ring Scanner

Quick Start Guide

Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.
Replace the Battery
Push the button and slide the lock to open the battery compartment
on the Bluetooth module and remove the battery.
Replace the battery in the compartment and slide the lock closed.
Ring Scanner Overview
Scan
Window
Trigger
Ring Strap
Optional C-ring
in small and
large sizes to
replace ring
strap
Note: The battery must be fully charged before the first use. The
Bluetooth Ring Scanner 8-Bay Charger must be purchased
separately.
Rev A
3/16
Wearing the Ring Scanner
The ring cable should not cross under your hand.
Wrist Position When Scanning
Incorrect
Warning: Do not stare directly into the laser beam.
Trigger Rotation
Bluetooth
module
Scanner head can
be rotated 180°
Left Hand
Attach Ring to Finger
Shipping
film
1. Remove the shipping film from the ring scanner window.
2. Slide your finger into the loosened ring strap.
3. Pull the ring strap to secure the ring to your finger.
Note: If using the C-ring, simply slide it on to your finger.
How to Scan a Bar Code
1D bar codes
Pair the Ring Scanner
The ring scanner can be used with Bluetooth devices, Honeywell
mobile computers, Honeywell vehicle mount computers, Honeywell
communication bases and Access Points.
Incorrect
Pair with a Bluetooth Device
The 8670 ring scanner can pair with host Bluetooth devices
such as personal computers, laptops, tablets, and Apple
devices.
Correct
1. Scan the Bluetooth HID Keyboard Connect bar code
below.
Bluetooth HID Keyboard Connect
The ring scanner begins ticking and the LED on top of the
Bluetooth module blinks to indicate pairing mode.
Change Ring Strap to C-Ring
1. Turn the ring scanner 90°.
2. Press the latch down.
Right Hand
3. Remove the ring strap.
4. Reverse these directions to attach the C-ring.
2. Set your host device so it searches for other Bluetooth
devices. (Refer to your host device's User's Guide for pair-
ing instructions.)
2D bar codes
3. Once your host device has located the scanner, select the
8670 ring scanner name from the list displayed. Some host
devices will automatically pair with the ring scanner. If your
host device automatically pairs with the ring scanner, it dis-
plays a successful pairing message and you do not need to
continue to the next step.
4. If your host device does not automatically pair with the ring
scanner, a PIN is displayed. This PIN must be scanned
within 60 seconds. Using the ring scanner, you must
quickly scan Bluetooth PIN Code below, then scan the
numeric bar code(s) for the PIN code from the
Programming Chart, then scan the Save bar code.
Bluetooth PIN Code
When the ring scanner pairs with a host, the LED on the top of
the ring scanner flashes green and the LED on the Bluetooth
module remains solid blue. Your host device should now be
paired with the ring scanner and be able to accept incoming
data from the 8670.
®
Keyboard Country
Your keyboard layout default is a US keyboard. To change this
layout, scan the appropriate keyboard country code.
Belgium
Denmark