Cleaning And Storage - Honeywell 8670 Quick Start Manual

Cleaning and Storage

Clean a Battery
The battery should not require cleaning unless it has become
heavily soiled. Use only mild detergent with a slightly damp
cloth to clean the outside of the battery. Do not use solvents or
flammable cleaners. Allow the case to dry fully before using
again.
Clean the Battery Charger
Use only mild detergent with a slightly damp cloth to clean the
outside of the charger. Do not use solvents or flammable clean-
ers. Allow the case to dry fully before using again.
Do not allow cleaning agents of any kind to contact the battery
charging contacts or they may be damaged. If necessary, clean
them with a soft-bristle, dry brush or compressed air.
Unplug the charger from the power source before cleaning or
removing debris from the charging pockets. Disconnect the
charger from AC power by pulling the plug, not the cord.
Keep dirt and foreign objects out of the battery pocket. Do not
short circuit any of the contacts in the battery pocket. This could
result in injury or property damage.
Storage
Remove all batteries from the charging pockets and disconnect
AC power before placing the 8670 8-Bay Battery Charger in
storage. It should be stored in a cool, dry place, protected from
weather and airborne debris.
11