Makita XLC01 Instruction Manual page 9

5. Place the entire cloth part of the dust bag inside
the tool itself.
1
► 1. Front cover
6. Close the front cover completely.
Installing the paper pack
1. Unfold the entrance of the paper pack before
setting it on the dust stopper.
► 1. Upper side of dust stopper 2. Lower side of dust
stopper
1
2
Use the dust stopper also when installing paper pack.
Be careful not to take the upper side for the lower side
by mistake because they are different each other.
3
► 1. Dust stopper 2. Paper pack 3. Groove
2. Insert the protrusion of the paper pack into the
groove in the dust stopper as shown in the figure.
► 1. Lower groove
3. There is no distinction between the upper and
lower sides of the paper pack. You may insert its
protrusion of any side into the lower groove of the
dust stopper.
9 ENGLISH
1
2
1