Table of Contents
Advertisement
RFID Settings
Use RFID settings to enable the RFID service.
RFID Settings
Enable RFID Service
Virtual Wedge Settings
Use virtual wedge settings to configure the virtual wedge.
Virtual Wedge Settings
Virtual Wedge
Virtual Wedge Method
Barcode Scanner Grid
Label Encoding (Code Page)
Port Pin Assignments
Use this section to learn about the ports pin assignments on the CV41, smart dock, and
cables.
COM 1 and COM 2 Ports
The COM 1 and COM 2 ports are located on the smart dock. By default, Pin 9 is config-
ured to provide + 5 V for an external bar code scanner, or it can be configured to provide
RI.
1
6
Pin
1
2
3
4
5
6
7
8
9
Shell
54
5
9
Signal
Description
DCD
Data carrier detect (input)
RXD
Receive data (input)
TXD
Transmit data (output)
DTR
Data terminal ready (output)
GND
Signal/power ground
DSR
Data set ready (input)
RTS
Request to send (output)
CTS
Clear to send (input)
+5 VDC or RI
Bar code scanner power (500 mA max)
or Ring indicator (input)
CGND
Chassis ground
CV41 Vehicle Mount Computer (Windows CE) User Guide
Default Value
Off
Default Value
Enable
Adapt to Application
Null
1252(D)-ANSI Win3.1 US
Advertisement
Table of Contents
