Activate Cdma Communications; About Gps - Honeywell Intermec CV41 User Manual

Activate CDMA Communications

To activate the CDMA radio module in your computer, you need to contact your wireless
carrier and set up an account for each computer. The following table lists the carriers
that Honeywell currently supports. If your carrier is not listed in the table, please con-
tact Honeywell product support to see if it is now supported.
Country
United States
The carrier requires the Mobile Equipment Identifier (MEID) to start the activation pro-
cess. You can find the MEID:
•
After you supply the MEID to your carrier, the carrier responds with values that you must
enter in the Gobi Connection Manager (if required). Your carrier sales contact and a
Honeywell representative can guide you through the process.
1. Press the Power button to place the CV41 in Suspend mode.
2. Connect an external WWAN antenna. For more information, see
3. Press the Power button again to turn on the CV41.
4. Select Start > Programs > GobiCM > GobiCMExe.
5. In Firmware Selection, select your wireless carrier and click Update Firmware.
6. Select the CDMA tab, enter *22899 in the Activation Code field, and tap Save
7. Tap Activate.
8. Tap Save Connection Data.

About GPS

The GPS receiver in the CV41 delivers standards-based National Marine Electronics
Association (NMEA) data strings to GPS applications. To use the GPS receiver, you need
to:
•
•
For more information on purchasing an external GPS antenna, contact your Honeywell
representative.
CV41 Vehicle Mount Computer (Windows CE) User Guide
Carriers
Verizon
in the Gobi Connection Manager menu. Tap Start > Settings > Control Panel > Gobi
Connection Manager > CDMA tab.
Antenna.
Connection Data.
enable WWAN communications. For more information, see
Communications.
install an external GPS antenna to the CV41. For more information, see
External Antenna.
Connect an External
Use WWAN and GPS
Connect an
63