Testing - Honeywell PC42d Service & Repair Manual

TITLE
PC42d Service Repair Manual

Testing

OPERATION:
It is a requirement to run the printer through the service test especially when replacing new main logic board (MLB), peripheral
PCBA, and removing the top cover.
Testing Instructions
1. See PC42d Printers Final Test Procedure OTPPC42d-000 for test procedure and setup.
2. The PC42d Printers Final Test Software (405-xxx-xxx) can be found on the Intermec Service Repair Information (SRI)
site at:
http://in/depts/service/Main/ServiceQualityTestEngineering/ServiceQualityTestEngineering/Service%20Repair%20Information%20S
. Access to this site is available to Intermec Team Members only.
RI/default.aspx
3. The test fixture bill of material for PC42d Printers Final Test (405-xxx-xxx) can be found on Intermec Service Repair
Information (SRI) site at:
http://in/depts/service/Main/ServiceQualityTestEngineering/ServiceQualityTestEngineering/Service%20Repair%20Information%20S
. Access to this site is available to Intermec Team Members only.
RI/default.aspx
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
www.honeywellaidc.com
Model DOCUMENT NO.
L3-GLBL-RPR-4260
PC42d
(Rev A)
PAGE
Page 25 of 25
L3-GLBL-RPR-4260 (Rev A)