Makita DRT50 Instruction Manual page 14

NOTE: Before cutting on the actual workpiece, it is
speed depends on the trimmer bit size, the kind of
workpiece, and depth of cut. Moving the tool forward
to the bit or motor. Moving the tool forward too slowly
may burn and mar the cutting surface.
When using the trimmer shoe, the straight guide, or the
trimmer guide, be sure to keep it on the right side in the
of the workpiece.
1
1. 2. Workpiece 3. Straight guide
NOTICE:
the tool, the depth of cut should not be more than
wish to cut grooves more than 3 mm deep, make
several passes with progressively deeper bit settings.
Using the straight guide
Optional accessory
1.
wing nut.
1. Bolt 2. Wing nut
2.
the clamp screw.
2
3
1. Clamp screw
3.
When you
1
1. Wing nut
4.
side of the workpiece.
14 ENGLISH
1
2
1
Loosen the wing nut on the straight guide and