Functional Description - Makita 6827 Instruction Manual

FUNCTIONAL DESCRIPTION
Switch action
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the "OFF" position when released
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop. For continuous operation, pull the
trigger and then push in the lock button.
To stop the tool from the locked position,
pull the trigger fully, then release it.
Lock button
Switch trigger
\
NOTE:
Even with the switch on and motor running, the bit will not rotate until you fit the point of
the bit in the screw head and apply forward pressure to engage the clutch.
Reversing switch action
CAUTION:
*Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
- i
This tool has a reversing switch to change
the direction of rotation. Move the revers-
ing switch lever to the A side for clockwise
rotation or the B side for counterclockwise
rotation.
Reversing witch lever
I
5