Makita 6827 Instruction Manual page 4

US8004 1
Specific Safety Rules
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its o w n cord. Contact with a
"live" wire will make exposed metal parts of the tool "live" and shock the
operator.
Be sure no one is below when using the tool in high locations.
2. Always be sure you have a firm footing.
3. Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immediately after operation: they may
be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the symbols used for tool.
v
....................................
volts
A
....................................
amperes
Hz ....................................
herts
TJ
....................................
alternating current
b
....................................
no load speed
u
....................................
Class
ti
Construction
.../
min ...................................
revolutions or reciprocation per minute
4