D-Link DWS-1008 User Manual page 320
Wireless 8 port switch with poe
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- Installation manual (17 pages)
Table of Contents
Advertisement
DWS-1008 User's Manual
user tech
Password = 1315021018 (encrypted)
user EXAMPLE/nin
filter-id = acl.101.in
mobility-profile = tulip
user EXAMPLE/tamara
filter-id = acl.101.in
mobility-profile = tulip
...
8.
Save the configuration:
DWS-1008 save config
success: configuration saved.
Enabling RADIUS Pass-Through Authentication
The following example illustrates how to enable RADIUS pass-through authentication for all
802.1X network users:
1. Configure the RADIUS server r1 at IP address 10.1.1.1 with the string sunny for the
key. Type the following command:
DWS-1008# set radius server r1 address 10.1.1.1 key sunny
2. Configure the server group sg1 with member r1. Type the following command:
DWS-1008# set server group sg1 members r1
3. Enable all 802.1X users of SSID mycorp to authenticate via pass-through to server
group sg1. Type the following command:
DWS-1008# set authentication dot1x ssid mycorp * pass-through sg1
4. Save the configuration:
DWS-1008 save config
success: configuration saved.
Enabling PEAP-MS-CHAP-V2 Authentication
The following example illustrates how to enable local PEAP-MS-CHAP-V2 authentication
D-Link Systems, Inc.
Configuring AAA for Network Users
315
Advertisement
Table of Contents
