D-Link DWS-1008 User Manual page 235

DWS-1008 User's Manual DWS-1008 User's Manual
To display multicast statistics only without also displaying all the other multicast information,
use the following command:
show igmp statistics [vlan vlan-id]
Clearing Multicast Statistics
To clear the multicast statistics counters, use the following command:
clear igmp statistics [vlan vlan-id]
The counters begin incrementing again, starting from 0.
Displaying Multicast Queriers
To display information about the multicast querier only without also displaying all the other
multicast information, use the following command:
show igmp querier [vlan vlan-id]
To display querier information for VLAN orange, type the following command:
DWS-1008dws-1008# show igmp querier vlan orange
Querier for vlan orange
Port Querier-IP
-----------------------------------------------------------------------
1 193.122.135.178
In this example, the pseudo-querier feature is enabled on VLAN orange.
Displaying Multicast Routers
To display information about the multicast routers only without also displaying all the other
multicast information, use the following command:
show igmp mrouter [vlan vlan-id]
To display the multicast routers in VLAN orange, type the following command:
DWS-1008# show igmp mrouter vlan orange
Multicast routers for vlan orange
Port Mrouter-IPaddr
---------------------------------------------------------------------------------------
6 192.28.7.5
D-Link Systems, Inc.
Querier-MAC TTL
00:0b:cc:d2:e9:b4 23
Mrouter-MAC Type
00:01:02:03:04:05 dvmrp
Configuring and Managing IGMP Snooping
TTL
33
230