Changing Rf Autotuning Settings - D-Link DWS-1008 User Manual

DWS-1008 User's Manual
Changing Power Tuning Settings
Enabling Power Tuning
RF AutoTuning for power is disabled by default. To enable or disable the feature for all
radios in a radio profile, use the following command:
set radio-profile name auto-tune power-config {enable | disable}
To enable power tuning for radios in the rp2 radio profile, type the following command:
DWS-1008# set radio-profile rp2 auto-tune power-config enable
success: change accepted.
Changing the Power Tuning Interval
The default power tuning interval is 300 seconds. You can change the interval to a value from
1 to 65535 seconds. To change the power tuning interval, use the following command:
set radio-profile name auto-tune power-interval seconds
To set the power tuning interval for radios in radio profile rp2 to 240 seconds, type the following
command:
DWS-1008# set radio-profile rp2 auto-tune power-interval 240
success: change accepted.
Changing the Power Backoff Interval
The default power backoff interval is 10 seconds. You can change the interval to a value from
0 to 65535 seconds. To change the power backoff interval, use the following command:
set radio-profile name auto-tune power-backoff-timer seconds
To change the power-backoff interval for radios in radio profile rp2 to 15 seconds, type the
following command:
DWS-1008# set radio-profile rp2 auto-tune power-backoff-timer 15
success: change accepted.
D-Link Systems, Inc.
Configuring RF Auto-Tuning
203