Advertisement
INSTALLATION (CTX700N/ND)
NOTE:
• Take care not to damage the painted surfaces of the
motorcycle.
• Illustrations show CTX700N type, other type is
similar.
1.
Refer to the Installation Instructions for the separately
sold backrest bracket, install the backrest bracket to
the motorcycle.
2. Install the pad as shown.
BACKREST PAD
BACKREST BAR
6 mm SH FLANGE BOLT
2 of 3
3. Loosely install the assembled backrest as shown.
ASSEMBLED BACKREST
8 mm FLANGE BOLT
(short)
Included in the
Backrest Bracket.
4. Tighten all loosely installed hardware to the
specifications in the torque chart.
• Left side shown, right side is the same.
8 mm FLANGE
CAP NUT
Included in the
Backrest Bracket.
Tighten.
Tighten.
Advertisement
