Connecting To The Water Outlet; Connecting To The Power Supply - Baumatic BDW65S Instruction Manual

Connecting to the water outlet

o Secure the drain hose, so that it cannot move whilst the
o Place the end of the drain hose on your drain pipe. Push it a
o IMPORTANT: Do not insert the drain hose too deeply into the
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL

Connecting to the power supply

o IMPORTANT: The electrical socket must still be accessible
o Consult the rating plate, located on the right hand side of the
o DO
Downloaded from www.Manualslib.com
dishwasher is in use. The top of the hose must be at a height
between 40 and 1000 mm. The free end of the hose must not be
immersed in water.
short way down into your drain pipe.
pipe, as this may cause siphoning.
LENGTH.
once the appliance is installed.
drop down door BEFORE making the electrical connections.
Ensure that the voltage reaching the plug is the same as that on
the rating plate.
NOT REMOVE
INFORMATION ON IT IS IMPORTANT.
manuals search engine
THE RATING PLATE AS THE
37