4.
clockwise with the wrench while holding the base plate.
1. Base plate 2. Mower blade 3. Wrench
Installing the mower blade
in reverse.
WARNING:
Install the blade carefully. It has
a top/bottom facing. Place the blade so that the
rotational direction arrow faces outward.
WARNING:
to secure the blade.
WARNING:
ing parts are installed correctly and tightened securely.
WARNING:
When you replace the blades, always
follow the instructions provided in this manual.
TROUBLESHOOTING
ment parts for repairs.
State of abnormality
Mower does not start.
Motor stops running after a little use.
Motor does not reach maximum
RPM.
Cutting tool does not rotate:
-
1
2
3
-
Probable cause (malfunction)
Cutting height is too low.
15 ENGLISH
For DLM461
NOTICE:
When installing the mower blade, slide
the protrusions touch the mower blade.
1. Protrusion 2. Mower blade
Remedy
Raise the cutting height.
manual.
Replace the blade.
1
2
-