Table of Contents
Advertisement
Honeywell
4.5
D
C BRAKING TIME AT START
DC-brake is activated when the start command is given. This parameter de-
fines the time before the brake is released. After the brake is released, the out-
put frequency increases according to the set start function by par. 2.2.
Output
frequency
RUN
STOP
Figure 9.7: DC braking time at start
4.6
F
REQUENCY TO START DC BRAKING DURING RAMP STOP
The output frequency at which the DC-braking is applied. See Figure 9.9.
Parameter Descriptions
Par 4.5
55
t
9
Hide quick links:
Advertisement
Table of Contents
