Functional Description - Makita BGA450 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
2
1. Button
2. Red part
3. Battery cartridge
1
1. Shaft lock
1. Slide switch
6
CAUTION:
• Always be sure that the tool is switched off and the battery cartridge is
removed before adjusting or checking function on the tool.
Installing or removing battery cartridge
007215
• Always switch off the tool before insertion or removal of the battery
cartridge.
• To remove the battery cartridge, withdraw it from the tool while sliding
the button on the front of the cartridge.
• To insert the battery cartridge, align the tongue on the battery cartridge
with the groove in the housing and slip it into place. Always insert it all
the way until it locks in place with a little click. If you can see the red part
3
on the upper side of the button, it is not locked completely. Insert it fully
until the red part cannot be seen. If not, it may accidentally fall out of the
tool, causing injury to you or someone around you.
• Do not use force when inserting the battery cartridge. If the cartridge
does not slide in easily, it is not being inserted correctly.
Shaft lock
007216
CAUTION:
• Never actuate the shaft lock when the spindle is moving. The tool may be
damaged.
Press the shaft lock to prevent spindle rotation when installing or removing
accessories.
Switch action
007217
1 CAUTION:
• Before inserting the battery cartridge into the tool, always check to see
that the slide switch actuates properly and returns to the "OFF" position
when the rear of the slide switch is depressed.
To start the tool, slide the slide switch toward the "I (ON)" position. For contin-
uous operation, press the front of the slide switch to lock it.
To stop the tool, press the rear of the slide switch, then slide it toward the "O
(OFF)" position.