Safety - Brady i5100 User Manual

Safety

Please read and understand this manual before using the BradyPrinter i5100 for the first time. This manual describes all of the main
functions of the printer. The available functions will depend on the configuration of the printer you ordered.
• The printer may only be used in a dry environment, do not expose it to moisture (water, mists, etc.).
• Only connect the device to other devices which have a protective low voltage.
• Switch off all affected devices (computer, printer, accessories) before connecting or disconnecting.
• Do not use the device in an explosive atmosphere.
• Do not use the device close to high-voltage power lines.
• The device or parts of it can become hot while printing. Do not touch during operation, and allow to cool down before changing material and
before disassembly.
• Perform only those actions described in this operating manual. Work going beyond this may only be performed by trained personnel or service
technicians and will void the manufacturer's warranty.
• Unauthorized interference with electronic modules or their software can cause malfunctions.
• Other unauthorized work on or modifications to the device can also endanger operational safety.
• There are various warning stickers on the device are there for your protection and should not be removed.
• The maximum sound pressure level is less than 70 dB(A).
• The printer is configured for voltages of 100 to 240 V ~, 50 to 60 Hz. Connect only to a grounded power outlet.
• Do not place the unit on an unstable surface or stand.
• Do not place anything on top of the unit.
• Keep the top clear of obstructions.
• Always use the printer in a well ventilated area. Do not block the slots and opening on the unit, which are provided for ventilation.
• Only use the power source indicated on the rating label.
• Use only the power cord that comes with the unit.
• Do not place anything on the power cord.
WARNING!
If the printer is operated with the cover open, clothing, hair, jewelry etc. that comes into contact with the exposed
rotating parts can create an entanglement and possible injury.
CAUTION!
During the print process, the print assembly can become hot. Do not touch the print assembly during operation, and
allow the assembly to cool down before changing material and before disassembly.
WARNING!
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
• Perform only those actions described in this manual. Only properly trained and qualified personnel should service the BradyPrinter i5100.
lectric Shock Hazard
DANGER! E
Do NOT open the BradyPrinter i5100 casing. Contact with the power supply can cause severe injury or death.
Environment
• Obsolete devices contain valuable recyclable materials that should be sent for recycling.
• Send to suitable collection points, separately from residual waste.
• The modular construction of the printer enables it to be easily disassembled into its component parts. Send the parts for recycling.
The electronic circuit board of the device is equipped with a lithium battery. Take old batteries to collection boxes in shops or public
waste disposal centers.
Prop 65 Warning Statement:
Prop 65 information related to this product is available at www.BradyID.com/i5100compliance.
BradyPrinter i5100
3