Video Recovery - Honeywell Lyric LCP300-L User Reference Manual

Video Recovery

Home > Security > Home > Security > Tools >
Home > Security > Home > Security >
If video from remote cameras is lost or becomes distorted, the system can attempt to reset video
streaming. By default, Gateway automatically begins to recover video about 60 seconds after
Network (Wi-Fi) communication has been restored.
The default setting is automatic
intervention (Manual Video Recovery Manual Video Recovery Manual Video Recovery Manual Video Recovery).
1. Press Security Security on the Home screen.
Security Security
2. Select Tools Tools Tools. Enter the Master User's security code. Tools
3. Press Network Network Config Network Network
4. Press Configure Network Configure Network.
Configure Network Configure Network
5. Select Automatic Video Recovery Automatic Video Recovery Automatic Video Recovery Automatic Video Recovery repeatedly to choose between automatic and manual
operation.
6. Press to return to the Tools menu.
Tools > Network Network Config Config
Tools > Tools > Network Network Config Config
automatic video recovery. You may set recovery to begin only by user automatic automatic
Config. Config Config
41