Garage Doors - Honeywell Lyric LCP300-L User Reference Manual

Garage Doors

Home > Automation > Garages Home > Automation > Garages
Home > Automation > Garages Home > Automation > Garages
Garage door operation from the Gateway requires installation of a garage door control kit.
Consult your security professional for more information.
The Lyric Gateway can remotely operate and monitor as many as four garage doors. The system
can be armed when the garage door is opened. After it is closed, the zone will be monitored
without providing burglary protection.
The Gateway can automatically close garage doors if left open for more than a given time period
(Close in Close in) or at a specified time (Close at
Close in Close in
monitoring only.
Do not use Gateway's garage door automation with any garage door opener
that lacks the safety features required by U.S. federal safety standards (this
includes any garage door opener model manufactured before January 1, 1993).
A garage door opener that cannot detect an object and stop and reverse the
door does not meet current U.S. federal safety standards. Your garage door
opener also must signal before unattended door operation. For more
information please consult your garage door opener manual.
NOTE: NOTE: NOTE: NOTE: Press Switches Switches on the Z-Wave Device Management menu to configure new Z- Switches Switches
Wave binary garage door openers. Ask your security professional for more
information.
Garage Door Operation from the Lyric Gateway
1. On the Home screen, select Automation
2. On the Z-Wave Device Management menu, press Garages
screen displays the Open/Closed status of your connected garage doors.
3. Select the garage door you wish to operate.
4. Press the button in the middle of the screen to open or close the garage door.
Close in Use the keypad to set a specific time to wait before an open garage door closes
automatically (maximum 12 hours and 59 minutes). Use leading zeroes when
entering a number of hours less than 10
Close at Use the keypad to set a specific time of day that an open garage door closes
automatically. Remember to specify AM or PM. Press Done
Edit Press to rename the selected garage door. Use the on-screen keypad and press
Save. Save. Save. Save.
NOTE: NOTE The Lyric Gateway does not support the status LED on the garage kit's relay
NOTE NOTE
module (Honeywell 5877).
Close at). Garage doors can also be programmed for
Close at Close at
IMPORTANT IMPORTANT IMPORTANT IMPORTANT
Automation. Automation Automation
10 ("09:15" or "00:45"). Press Done 10 10
33
Garages. The MyHome Gateway App
Garages Garages
Done to save. Done Done
Done to save. Done Done