Units And Accessories Supplied; Ky 96A Configurations - Honeywell BENDIX/KING KY 96A Installation Manual

B
SPECIFICATION
SPURIOUS RESPONSES AND CROSS
MODULATION PRODUCTS:
INTERCOM INPUT:
1.4

UNITS AND ACCESSORIES SUPPLIED

NOTE: Not all configurations listed below are currently available, consult Bendix/
King Equipment Catalog for further information.
1.4.A. KY 96A VHF Comm Transceiver, P/N 064-1052-XX, which is configured in the
following versions:
PART NUMBER
064-1052-10
064-1052-11
064-1052-30
064-1052-31
064-1052-50
064-1052-51
064-1052-60
064-1052-61
064-1052-70*
*Crown Series Unit
1.4.B. KY 97A VHF Comm Transceiver, P/N 064-01051-00XX, which is configured in
the following versions:
Rev 4, Apr 2003
TABLE 1-1 Technical Characteristics
At least 80 dB down.
When the mic is connected to the intercom input both
the receiver and mic audio appears at the audio output.
100 mVrms of mic audio into 500 ohms is required for
100 mW output.
TABLE 1-2 KY 96A Configurations
RECEIVER
AUDIO OUTPUT
SELECTIVITY
25 kHz 500 ohm headphone
50 kHz 500 ohm headphone
25 kHz 500 ohm headphone
50 kHz 500 ohm headphone
25 kHz 8 W into 4 ohms
50 kHz 8 W into 4 ohms
25 kHz 8 W into 4 ohms
50 kHz 8 W into 4 ohms
25 kHz 8 W into 4 ohms
IM 006-00674-0004.dwd
KY 96A, KY 97A
CHARACTERISTIC
FREQUENCY RANGE
118.000 to 135.975 MHz
118.000 to 135.975 MHz
118.000 to 136.975 MHz
118.000 to 136.975 MHz
118.000 to 135.975 MHz
118.000 to 135.975 MHz
118.000 to 136.975 MHz
118.000 to 136.975 MHz
118.000 to 136.975 MHz
Page 1-4