NEC SL 1000 Programming Manual page 195

ISSUE 1.0
Item No.
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Conditions
None
Programming Manual
Downloaded from www.Manualslib.com
Item
Trunk-to-Trunk Transfer Restriction
Turns off or on the Trunk-to-Trunk Transfer
Restriction. If enabled, Trunk-to-Trunk Trans-
fer is not possible.
VRS Personal Greeting (Message Greet-
ing)
Turns off or on a Service Code to record, lis-
ten to, or erase the Personal Greeting Mes-
sage.
Call Redirect
Turns off or on a multiline terminal user ability
to transfer a call to a predefined destination
(such as an operator, voice mail, or another
extension) without answering the call.
Department Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
Turns off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department
Group.
No Recall
No Recall set to "Allow" (1) will not stop trans-
ferred calls from recalling from a virtual exten-
sion.
Hold/Extended Park
Determine if an extension Class of Service
should allow either a normal or extended
Park.
No Callback
Turns off or on an extension to receive call-
backs.
Restriction for Tandem Trunking on Hang
Up
Allow (0) or Deny (1) an extension user ability
to set up a tandem/conference call automati-
cally when they hang up.
Restricted Unsupervised Conference
Allow (0) or Deny (1) an extension ability to
initiate an unsupervised conference.
VE Call Forward Set/Cancel
Turn on or off an extension ability to set or
cancel call forwarding for a virtual extension.
Trunk Park Hold Mode
Set the hold type when a trunk call is put on
hold by an extension.
Transfer Park Call
Turn off or on an extension ability to transfer a
parked call.
Station Park Hold mode
Call Park Automatically Search
Both Ring Enhancement
manuals search engine
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Allow
1 = Deny
0 = Allow
1 = Deny
0 = Off
1 = On
0 = Non Exclusive Hold (Off)
1 = Exclusive Hold (On)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Normal
1 = Enhanced
SL1000/SL1100
Default
COS 01 ~ 15
0
1
Program
1
20
1
0
0
0
0
0
0
0
0
0
1
0
2-173