Operation; Maintenance - Makita JR103D Instruction Manual

saw blades according to your work. Insert the recipro/
during operation.
tion procedure in reverse.
Hex wrench storage
1
1. Hex wrench 2. Protrusion
When not in use, store the hex wrench as shown in the

OPERATION

CAUTION:
against the workpiece during operation. If the
shoe is held away from the workpiece during opera-
tion, strong vibration and/or twisting will be produced,
causing the blade to snap dangerously.
CAUTION: Always wear gloves to protect your
CAUTION: Be sure to always wear suitable eye
protection which conforms with current national
standards.
CAUTION: Always use a suitable coolant (cut-
ting oil) when cutting metal. Failure to do so will
cause premature blade wear.
allow the tool to bounce. Bring the recipro saw blade
8 ENGLISH
into light contact with the workpiece. First, make a pilot
groove using a slower speed. Then use a faster speed
to continue cutting.
-
2
You can use the switch lever or trigger according to your
work.
NOTE: If the tool is operated continuously until the
battery cartridge has discharged, allow the tool to rest
for 15 minutes before proceeding with a fresh battery.

MAINTENANCE

CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.