Panasonic HL-BD82S Service Manual page 25

7.9. Door Lock Switch replacement
1. Disconnect the power supply cord and remove the Oven
from the cabinet.
2. Remove the upper cover.
3. Disconnect the terminals from the switch.
4. Unscrew the bracket A.
5. Pull out the switch from the holder.
6. Replace with a new switch by reversing the previous
steps.
7. PAY ATTENTION TO THE WIRING SEQUENCE N°1 -
N°4
8. The connections must not be loose.
9. Replace the profile.
10. Reinstall the Oven into the cabinet.
11. Reconnect the power supply cord after the Oven is
installed.
12. Run the Oven and check all functions.
7.10. Oven Filter replacement
1. Disconnect the power supply cord and remove the Oven
from the cabinet.
2. On Single oven remove the two upper covers.
3. Disconnect the terminals from filter.
4. Remove the filter damaged by unscrew two screws A and
dismount it from its bracket.
5. Replace a new one
6. Pay attention to the wiring sequence
7. The connections must not be loose.
8. Reinstall the Oven into the cabinet.
9. Reconnect the power supply cord after the Oven is
installed.
10. Run the Oven and check all functions.
7.11. Hinges preload replacement
1. Before mounting the hinges ensure that the code is cor-
rect and then proceed with the loading of the hinge
spring. There are two possible positions — LOADED and
UNLOADED — as indicated above. The hinge must be
assembled LOADED.
7.12. Safety thermostats replace-
ment
1. Disconnect the power supply cord and remove the Oven
from the cabinet.
2. On Single oven remove the two upper covers.
3. Unscrew the thermostat's holder:
a. Safety thermostat.
b. Double speed cooling fan thermostat.
4. Replace with a new thermostat by reversing the previous
steps.
5. The connections must not be loose.
6. Reinstall the Oven into the cabinet.
7. Reconnect the power supply cord after the Oven is
installed.
8. Run the Oven and check all functions.
25
HL-BD82S