Problem Solutions and Tips
I/O Module (IOM)
Check the IOM LEDs.
Check the SAS IN port and SAS OUT port LEDs (amber LEDs). If
they are on, try to solve the SAS connection problems indicated by
them. If the fault LED (amber LED) on a IOM is on, the IOM is
defective.
Before you replace the defective IOM, please contact our Service
Desk first.
For more information refer to
Temperature Sensor Error Message
Temperature too high
The temperature sensors have measured an extreme temperature (tolerable
temperature for operation see
Check ServerView for service action.
Error LED of the Hard Disk Drive Indicates Disk
Failure
Check whether the hard disk drive has been correctly installed and
locked (see
Dummy" on page
Replace the hard disk drive. If the error LED is still on, contact the
service organization.
42
Cisco C880 M4 Storage Subsystem Operating Manual for Server with E7-8800 v3 CPU
section "I/O Module" on page25.
section "Technical Data" on page
section "Removing/Installing Hard Disk Drive/Drive
29).
Fault Clearing
7).