Honeywell VISTA-128BPT Installation And Setup Manual page 82

VISTA-128BPT/VISTA-250BPT Installation and Setup Guide
Limitation of Access Schedules Worksheet
Enter the appropriate time window numbers for each access schedule.
Acc Mon
Sch W1
1
2
3...8
NOTE: The holidays used for the access groups are the same as those defined in the holiday schedule.
Limitation of Access Schedules Programming
To program access schedules enter Scheduling Menu Mode Installer Code + # 80. After entering Scheduling Menu
Mode, press [0] until the "Access Sched. ?" prompt appears.
PROMPT
Access Sched. ?
1 = YES 0 = NO 0
ACCESS SCHED # ?
01-08, 00 = Quit 01
MON A1 Window 1?
00:00 00:00 00
MON A1 Window 2 ?
00:00 00:00 00
TUE A1 Window 1?
00:00 00:00 00
Hol A1 Window 1 ?
00:00 00:00 00
Hol A1 Window 2 ?
00:00 00:00 00
Quit ?
1 = YES 0 = NO 0
6-14
Tues Wed
W2 W1 W2 W1 W2
EXPLANATION
Enter 1 to program access schedules.
Enter the access control schedule number between 01 and 08.
Press [∗] to accept entry.
Enter 00 at the "Access Sched #?" prompt to quit the access control menus and display the Quit ? prompt.
Enter the first time-window number (01-20) for this access schedule for the displayed day. As the number is
keyed in, the actual time that has been stored for the window is displayed.
Press [∗] to continue.
Enter the second time-window number from 01-20 for this access schedule for the displayed day. As the
number is keyed in, the actual time that has been stored for the window is displayed.
Press [∗] to continue.
Repeat the procedure for the other days of the week. When the last day of the week has been programmed,
the windows for holidays may be entered.
Enter the first time-window number for holidays for this access schedule. As the number is keyed in, the
actual time that has been stored for the window is displayed.
Press [∗] to continue.
Enter the second time-window number for holidays for this access schedule. As the number is keyed in, the
actual time that has been stored for the window is displayed.
Press [∗] to continue.
Enter 0 at the "Quit ?" prompt to return to the main menu choices and continue programming.
Enter 1 to quit Scheduling Menu Mode.
Thurs Fri
W1 W2 W1 W2 W1
Sat Sun Hol
W2 W1 W2 W1 W2