Cisco Wireless Ip Phone 882X Series Accessory Guide - Cisco 8821 Accessory Manual

Charge Your Phone with the Desktop Charger
Note
Step 2 Place your phone in the charging slot with the screen facing towards you. If your phone is in a case, press the
phone into the charging slot to ensure that the phone connects with the contacts.
Make sure that the LED on the phone lights red. If the LED does not light up, remove the phone and reinsert
it into the charger.
If your phone is in a case, the phone and case will tilt out because of the case.
Step 3 When you remove the phone from the charger, tilt the phone forward and lift it up to disconnect the connecter
from the magnets.
Step 4 (Optional) Slide the charging cup into the charger. Make sure that the cup is flush with the front and top of
the charger.

Cisco Wireless IP Phone 882x Series Accessory Guide

10
You might need to use two hands to remove the cup the first
time.
Cisco Accessories