Advertisement
If the vehicle is not equipped with a cassette/MP3/
CD player, go to step 18; otherwise, go to step 13.
13. Remove the player panel by removing the two
self-tapping screws and two clips.
PLAYER PANEL
SELF-TAPPING
SCREW
14. Remove the player/pocket assembly. Unscrew the
four flange nuts, and pull the assembly out toward
you. Unplug the audio subharness cable
connector.
VEHICLE CONNECTOR
(with navigation system)
AUDIO
SUBHARNESS
CONNECTOR
(with navigation
system)
LEFT PLAYER
BRACKET
6 mm
RIGHT
FLANGE
PLAYER
NUT
BRACKET
PLAYER BASE-
BRACKET
8 of 24
CLIP
2306141T
VEHICLE
AUDIO
CONNECTOR
SUBHARNESS
(without
CONNECTOR
navigation
(without
system)
navigation
system)
LEFT PLAYER
SUBBRACKET
2306120T
RIGHT PLAYER
SUBBRACKET
15. Remove the left and right audio brackets (two
washer-screws and one self-tapping screw for
each bracket). Separate the player and pocket.
Set the pocket aside; it will not be reused.
LEFT AUDIO
BRACKET
WASHER-
SCREW
SELF-
TAPPING
SCREW
16. Slide the clip nut (supplied) onto the display
module flange.
WASHER-
SCREW
(Supplied
with
Audio
Attachment
kit)
SELF-
TAPPING
SCREW
LEFT
PLAYER
BRACKET
BRACKET
HOLE
SCREW
POSITION
17. Set the player on the display module pocket.
Position the left and right player brackets on the
display module pocket and player, and reinstall
the four washer-screws. Install the the three self-
tapping screws to secure the display module
pocket.
AII 24378 (0303)
RIGHT AUDIO
BRACKET
PLAYER
(Cassette/MP3/CD)
SELF-TAPPING
SCREW
POCKET
(Do not reuse.)
DISPLAY
MODULE
POCKET
PLAYER
(Cassette/MP3/CD)
RIGHT
PLAYER
BRACKET
SELF-TAPPING
SCREWS (2)
(Supplied with
DISPLAY
XM radio
MODULE
attachment kit)
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
WASHER-
SCREW
2N28080M
CLIP NUT
WASHER-
SCREW
(Supplied
with Audio
Attachment
kit)
Advertisement
