Advertisement
45. Connect the XM radio harness 3-pin connector to
the FM modulator unit harness 3-pin connector,
then attach the 3-pin connector clip to the hole in
bracket B.
BRACKET B
XM RADIO HARNESS
3-PIN CONNECTOR
46. Unplug the vehicle antenna cable, and plug it into
the FM modulator unit antenna cable. Plug the
other FM module antenna jack into the vehicle
antenna cable.
WIRE TIE
FM MODULATOR
ANTENNA CABLE
47. Wrap one EPT seal around the antenna jack, and
secure the antenna jack to the vehicle antenna
jack with one wire tie. Secure the DIN cable, the
display module cable, and the antenna harness to
the vehicle harness with one wire tie.
16 of 24
FM MODULATOR UNIT HARNESS
3-PIN CONNECTOR
WIRE TIE
EPT SEAL
2N28130M
VEHICLE ANTENNA CABLE
48. Secure the XM radio harness to the vehicle
harness with one wire tie.
(with pocket)
(with player)
49. Bundle up the excess display module cable, and
secure it with one wire tie.
DISPLAY
MODULE
CABLE
(Bundle up.)
AII 24378 (0303)
WIRE TIE
XM RADIO
HARNESS
DISPLAY
MODULE
ASSEMBLY
WIRE TIE
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
2N28140M
Advertisement
