Advertisement
With Optional Ashtray:
•
Open the lid, and remove the ashtray.
•
Remove the two self-tapping screws.
•
Gently pull out on the two retaining clips,
unplug the cigarette lighter harness connector,
vehicle connector, illumination bulb, and
remove the center holder.
CENTER
HOLDER
ASHTRAY
SELF-TAPPING
SCREW
RETAINING
CLIPS (2)
6 of 24
ILLUMINATION
BULB
CIGARETTE
VEHICLE
LIGHTER
CONNECTOR
HARNESS
CONNECTOR
If the vehicle is equipped with a cassette/MP3/CD
player, go to step 13; otherwise, go to step 5.
5.
Remove the pocket:
•
Apply masking tape to the edge of the center
panel.
•
Remove the two self-tapping screws.
•
Push in on the bottom of the lid, then pull out
on the top by inserting the end of a hook tool
between the pocket and center panel. Pull the
pocket toward you to release the two retaining
clips.
•
Set the pocket aside; it will not be reused.
HOOK
TOOL
RETAINING
CLIPS (2)
2730010K
SELF-TAPPING
SCREW
6.
Remove the right and left inner covers (one hook
and one clip for each cover). Set the inner covers
aside; they will not be reused.
LEFT INNER
COVER
HOOK
AII 24378 (0303)
CLIP
RIGHT INNER
COVER
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
MASKING
TAPE
POCKET
LID
POCKET
2206073K
POCKET
OPENING
2226010K
Advertisement
