Sharp AH-S22AW2 Service Manual page 33

13. Remove the compressor cover.
14. Remove the thermostat of the heat exchanger.
Heat exchange pipe thermistor
fixed position
15. Remove the front panel assembly.
16. Cautions when replacing the Power Factor Module,
Heat exchange
pipe thermistor
33
Orifice 2 screws
Control cover 4 screws
Wire guard 4 screws
Remove these screws and disengage these hooks.
4 screws
2 screws
Power Transistor Module, or Diode Bridge
(1) The screws should be firmly tightened at the
torque of 8 to 10 kg f cm (78.4 to 98 N).
(2) For the Power Transistor Module or Diode
Bridge, the silicon grease should be evenly
applied between it and radiator plate.
AH-S22AW2
AH-S25AW2
4 hooks
4 hook