Philips HR2342 User Manual page 25

3
After the Pasta and noodle maker finishes kneading, it will beep a few times
and the pasta extrusion will start after a few seconds. Place a container right
under the outlet. Cut the pasta into the desired length with the cleaning tool.
Note:
• If the ratio of liquid and flour is not correct, the
extrusion will not succeed. In this case, prepare
the ingredients again.
• Move the cleaning tool downwards to cut the
pasta.
4
When the extrusion process is complete, the appliance will beep a few
times.
Note:
• Do not turn the control knob to the "OFF" position before the whole
process is over (you will hear the "beep" sound).
• The whole working process (including kneading and extruding) takes
around 18 minutes for 400g of flour.
5
After the pasta making is complete, if you notice some leftover dough inside
the chamber, you can
then turn the control knob to the extra-extrusion position.
Start/Pause button to start the extra-extrusion program.
Note:
• You may find some fine pasta threads on the
pasta surface. This is normal.
• The cooking time of the pasta varies depending
on personal preferences, pasta shapes, and
number of servings.
turn the control knob to the OFF position first, and
Press the
OFF
2 1
3
English
25