Philips HR2342 User Manual page 24

Starting the pasta making program
• Do not select the extra extrusion program before the dough mixing is
complete. Otherwise, this will damage the Pasta and noodle maker and its
lifetime.
• Do not disconnect the power cord before the processing is complete. If you
have to stop the pasta making process, turn the control knob to "OFF" to
stop the working process and then disconnect the power cord from outlet
before performing other operations.
• Do not exceed the maximum operation cycle of 2 cycles continuously at all
applications. To better protect the lifetime of the appliance, you can restart
using the appliance after 30 minutes upon 2 continuous operation cycles.
• If you intend to use the appliance continuously, clean each shaping disc
with the supplied cleaning tool each time after the pasta making session.
For easy cleaning, do not soak the shaping disc directly in water.
1 Turn the control knob to
pasta making process, and then
Start/Pause button.
2
After the kneading starts, slowly pour in the liquid
along the entire length of the slot in the lid.
Note:
• During dough mixing, do not add other
ingredients after you have poured in the liquid.
Otherwise, it will affect the results of the pasta
texture.
English
24
Important
select the automatic
press the
1
2