Figure 41: Removing/Replacing The Power Supply - Canon imagePRESS A3200 Installation And Service Manual

9. Remove the four back panel screws that attach the power supply to the back of the chassis
10. Remove the left and right screws that secure the power supply's support beam to the two
11. Gently lift the power supply with its support beam out of the chassis.
Left screw
Right screw
Left chassis bar
To service the power supply,
N :
OTE
place the imagePRESS Server in
upright position.
S P
ERVICE ROCEDURES
(see Figure 41).
chassis bars (see Figure 41).
F 41: Removing/replacing the power supply
IGURE
116
Support beam for power supply
Power supply
Back panel screw
(1 of 4)