Cisco TelePresence Manual page 4

CUCM Integration with Content Server 6.2
Step 5
Click Save.
Create the SIP Trunk
Step 1
In Cisco Unified CM Administration, expand Device and click Trunk.
Step 2
On the Find and List Trunks page, click Add New.
Step 3
On the Trunk Configuration page, in the Trunk Type field, click SIP Trunk.
Step 4
In the Device Protocol field, click SIP and click Next.
Step 5
Under Device Information, enter the following:
Field
Device Name
Description
SRTP Allowed
Step 6
(Optional) If user phones are contained in a calling search space, under Inbound Calls, enter the
following.
Field
Calling Search Space
Redirecting Diversion Header Delivery - Inbound Check this check box.
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
3-18
Chapter 3 Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
Setting
Enter TCS_SIP_Trunk or another name.
Enter SIP trunk for Cisco TCS or another description.
If you will enable CUCM authentication and encryption, check this check
box.
Setting
Select the name of the calling search space that
contains the user phones.